Silicon Iron Anode
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Beijing
-
Validity to:
Long-term effective
-
Last update:
2022-03-21 20:43
-
Browse the number:
70
+
- Contactaixin:
yingjiegongye(Mr.)
-
Email:
telephone:
phone:
-
Arrea:
Beijing
Address:No. 601, Building T2, Changsha Greenland Intercity Space Station, Yuhua Block, Changsha Area of China (Hunan) Pilot Free Trade Zone
-
Website:
http://www.corroco-china.com/ http://yingjiegongye.jiangsuxinxin.com/
+
Description:
High Silicon Cast Iron Anodes is a form of impressed current anode.It is one of the most effective anode materials in various environments cathodic protection.This anodes can operate effectively in a variety of electrolytes, from soil and freshwater to brackish and salt water environments. Both solid or tubular silicon iron anodes are available in Corroco company
Advantage:
1. High Silicon Iron Anodes can be used in a wide range of application.
2. Low consumption rate of anodes
3. Higher current densities can be applied in fresh or sea water.
Application:
1. Above ground storage tank bottoms
2. Reinforced concrete structures
3. Under ground storge tank
4. Fine sand environment
5. Environment evolution of O2,Cl2 or a combination of both
Chemical Composition of Silicon Iron Anode:
| Chemical Composition: | |
Silicon (Si) |
14.20-15.75% |
Manganese (Mn) |
1.5% max. |
Carbon (C) |
0.70-1.10% |
Chromium (Cr) |
3.25-5.00% |
Molybdenum (Mo) |
0.20% max. |
Copper (Cu) |
0.50% max. |
Iron (Fe) |
balance |
Typical analysis by ASTM A518-86 Grade 3 and BS. 1591 | |
Specification:
1. Consumption of Anode Material
2. In tests and real life installation, up to 99.8% of the anode material was consumed. Consumption figures of 88 % to 93.5% are common. The consumption rates are:
| Environment | Current Density (A/m2) |
Consumption Rate (Kg/A.Year) |
Coke Backfill |
10-30 |
0.1 |
Fresh Water |
10-30 |
0.15 |
Seawater |
10-50 |
0.5 |
Soil |
10-30 |
0.3 |
Tensile strength |
103 N/mm2 |
Compressive strength |
689 N/mm2 |
Brinell hardness |
520 HB |
Density |
7.0 g/cm3 |
Melting point |
1300°C |
Coefficient of linear expansion |
1.86*10-5/0C (0-1000C) |
Parameters:
| Standard Sizes Of Solid Anodes: | ||||
TYPE |
O.D. |
Length |
Weight(kg) |
Surface Area(m2) |
CS-12 |
1.5" |
60" |
12.7 |
0.2 |
CS-13 |
2.0" |
60" |
22.7 |
0.25 |
CS-14 |
2.5" |
60" |
33.5 |
0.32 |
CS-15 |
3.0" |
60" |
49.0 |
0.38 |
Dimensions and weights shown are nominal of +/-5 percent. | ||||
Standard Sizes of Tubular Anodes | |||||
Type |
Dimension (mm/inch) |
Surface area |
Weight |
||
O.D |
I.D |
length |
|||
HL-TS-1 |
56.0 (2.20) |
37.0 (1.46) |
2134 (84) |
0.375 (4.04) |
21.0 (46.3) |
HL-TS-2 |
66.0 (2.60) |
42.5 (1.67) |
2134 (84) |
0.442 (4.76) |
28.8 (63.5) |
HL-TS-3 |
68.6 (2.70) |
42.5 (1.67) |
2134 (84) |
0.460 (4.95) |
32.0 (70.5) |
HL-TS-4 |
96.0 (3.80) |
76.0 (3.00) |
2134 (84) |
0.644 (6.93) |
41.0 (90.4) |
HL-TS-5 |
122.0 (4.80) |
88.0 (3.46) |
2134 (84) |
0.818 (8.80) |
80.6 (177.7) |
HL-TS-6 |
122.0 (4.80) |
100.0 (4.0) |
2134 (84) |
0.818 (8.80) |
55.3 (121.8) |
HL-TS-7 |
56.0 (2.20) |
37.0 (1.46) |
1524 (60) |
0.268 (2.89) |
14.3 (31.6) |
HL-TS-8 |
66.0 (2.60) |
42.5 (1.67) |
1524 (60) |
0.316 (3.40) |
20.6 (45.5) |
HL-TS-9 |
96.0 (3.80) |
76.3 (3.00) |
1524 (60) |
0.460 (4.95) |
30.0 (66.1) |
HL-TS-10 |
122.0 (4.80) |
88.0 (3.46) |
1524 (60) |
0.584 (6.29) |
57.7 (127.1) |
HL-TS-11 |
122.0 (4.80) |
100.0 (4.0) |
1524 (60) |
0.584 (6.29) |
39.2 (86.4) |
http://www.corroco-china.com/
