Mini Powder Coating Machine
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Zhejiang
-
Validity to:
Long-term effective
-
Last update:
2021-12-06 18:36
-
Browse the number:
176
+
- Contactaixin:
shanggao88(Mr.)
-
Email:
telephone:
phone:
-
Arrea:
Zhejiang
Address:No. 704, Unit 1, Building 4, Gouzhuang Jiayuan, Liangzhu Street，Hangzhou Zhejiang, China
-
Website:
http://www.nordunpowdercoating.com/ http://shanggao88.jiangsuxinxin.com/
+
Product Description
1.Voltage/electric current LED demonstrated that easy to distinguish of read.
2.The transformer close neighbor spray nozzle, the voltage loses lowly.
3.The electric discharge effect is superior, on the powder rate is high.
4.The direct-viewing air-flow meter demonstrated that operation great convenience.
5.The furniture structural design namely artistic is also reasonable.
6.The spray gun switch uses feel to be good, service life long magnetism controls the switch.
7.Many patterns spray nozzle may be supplied of the choice.
8.The stainless steel supplies the powder barrel, clear of powder is quickly convenient.
9.General powder and metal powder may use.
The Method of use of powder coating machine
1.Check that all parts of the equipment are installed according to the assembly drawing and connected correctly.
2. Turn on the power, the power indicator light is on, input compressed air, adjust the air supply regulating valve on the rack.to make it to be 6BAR.
3. Add the powder to the powder supply bucket for about 2/3 of the best, then adjust the fluidizer regulating valve to make the powder in the barrel flip, but it should not be too heavy to avoid the powder from rushing out of the barrel, after finishing adjustment lock the regulating valve, close the barrel cover and buckle, and connect the exhaust hose to the spray chamber.
4. Hold the spray gun towards the spray booth, press the trigger, adjust the high pressure rotary set, and select the high
pressure according to the product (usually 50-60KV for the first spray, 20-30KV for the second or multiple spray ).
5. Adjust the powder air pressure reducing valve. The timing air head indicator is about 2BAR, and the dilution air meter head about 0.1BAR. At this time, the workpiece can be sprayed.
Shipping
Before delivery, each machines are tested to be in good performance, then welled packed by wooden case or cartons, wrapped with film, filled with foams. For small packages, we will deliver by express, it only cost 3-5 days to wordwide, and directly to your door, if large orders, we will shipped by sea to your destination port or to your door.
http://www.nordunpowdercoating.com/
